Site managed, and products distributed in Australia, by MRT Performance

Increase Power and torque

Did you know that your car is detuned!
Unlock the hidden potential of factory ECU's

Learn more Power & Torque

Improve reliability, economy

100% money back satisfaction
Guarantee National Warranty

National Dealer Network

Worlds Number 1 here in Aus

Mitsubishi (UK with the FQ models)
Cosworth (USA and UK)
Subaru (UK with the Prodrive models)
Learn more Tuning Software

The ProECU Subaru CAN Petrol suite supports 2007 onward Subaru Impreza, Legacy & Forester vehicles from all known commercial markets.

172 ECU versions are supported from all world regions.

Subaru CAN Petrol Tuneable Parameters

Subaru CAN Petrol allows you to alter parameters in the ECU, such as:

  • Accelerator Maps
  • Boost Control
  • Desired Boost Pressure & Wastegate Solenoid Control Maps
  • Diagnostic Trouble Codes
  • Fuel Tables
  • Fuel Injector Scaling
  • Fuel Injector Battery Voltage Compensation
  • Ignition Timing Tables
  • Rev Limit
  • Speed Limit
  • TGV Control
  • Torque Limits
  • Turbo Dynamics Control

 


Subaru CAN Petrol Supported Vehicles

Subaru CAN Petrol currently supports over 140 different ECU versions.

EcuTek Subaru CAN Petrol supports the following Subaru 2007 onward Impreza, Legacy & Forester vehicles

  • AUS Forester XT Auto
  • AUS Forester XT Manual
  • AUS Forester XT MT 2008
  • AUS Forester XT S-Edition 2011MY
  • AUS Legacy 3.0 SI Drive
  • AUS Legacy GT SI Drive
  • AUS Legacy GT SI Drive STI
  • AUS Legacy GT 2010 onwards
  • AUS Legacy Outback 3.0 SI Drive
  • AUS Liberty 2007
  • AUS Liberty 3.0R 2007
  • AUS Impreza WRX 2008 onwards
  • EU Forester Auto 2008
  • EU Forester XT Auto
  • EU Forester XT Auto 2011
  • EU Forester XT Manual
  • EU Legacy 3.0R SI Drive 2007
  • EU Legacy Outback 2008 onwards
  • EU Legacy Spec B MT 2007
  • EU Legacy GT 2010
  • EU Impreza STI MT 2008 onwards
  • EU Impreza WRX 2008 onwards
  • EU Tribeca 3.0R 2007
  • EU Tribeca 2.5R 2009
  • GULF Impreza STI MT 2010
  • GULF Impreza STI MT 2011
  • JDM Exiga GT AT 2009
  • JDM Exiga 2010
  • JDM Forester TS 2011
  • JDM Forester XT 2007 onwards
  • JDM Impreza S-GT
  • JDM Legacy 3.0R MT 2007
  • JDM Legacy 3.0R 2008
  • JDM Legacy AT 2008MY
  • JDM Legacy GT
  • JDM Legacy GT 2.0 AT 2007
  • JDM Legacy GT 2.0 SpecB AT 2008
  • JDM Legacy GT AT 2009
  • JDM Legacy GT SI Drive
  • JDM Legacy GT SI Drive 2008
  • JDM Legacy GT 2.5 2010
  • JDM Legacy GT ES 2.5 2011MY
  • JDM Legacy ST 2008
  • JDM Legacy STI 2009
  • JDM Legacy STI A-line 2009
  • JDM LGT AT tuned by STi 2008
  • JDM Impreza STI 2008 onwards
  • JDM Impreza STI A-line 2010 onwards
  • SA Legacy GT 2010
  • SA Impreza STI 2008 onwards
  • SA Impreza WRX 2008 onwards
  • US Forester XT Auto 2008
  • US Forester XT Manual 2008
  • US Forester XT 2009
  • US Forester 2.5R 2010
  • US Legacy AT 2009
  • US Legacy GT
  • US Legacy GT MT
  • US Legacy GT SI Drive
  • US Legacy GT 2010
  • US Legacy Spec B 2008
  • US Impreza 2.5R 2007 onwards
  • US Impreza STI 2008 onwards
  • US Impreza WRX 2008 onwards
  • US Tribeca 3.6R 2008 onwards

Subaru CAN Petrol Live Data

When connected to a car, the ProECU software offers real time data and map tracing.

The following example data shows 24 out of approximately 110 live data parameters is available from the "Live Data" tab of the ROM file being accessed. This data is accessed directly from the ECU in real time.

  • RPM: Engine speed. (Revolutions Per Minute)
  • Injector Duty Cycle: Percentage of time that the injector is open vs. closed (the time available changes as Engine speed increases (becomes less).
  • Ignition Timing: This displays the actual ignition timing that the ECU is currently using
  • Knock Retard: Knock retard is the amount of Ignition timing removed by the ECU because of knock
  • Air Flow: Shows the reading from the Mass Airflow sensor
  • External Lambda/AFR Input Channel: This will only be displayed if an External Sensor has been configured in DeltaDash.

Custom RaceROM parameters such as:

  • Desired Boost
  • Engine Load
  • Ignition Knock Retard
  • Ignition Learnt Correction
  • Ignition Coarse Correction
  • Knock Sensor Input
  • Initial & Max Wastegate Duty



It is possible to log the data shown during Map Access mode for analysis in DeltaDash or ProECU.
It is then possible to customise the way the logged data are displayed using the Time Graphs, Data Table, Custom 2D Graphing, and Custom 3D Graphing tabs in the Log Viewer, as shown below:


Performance Books