Site managed, and products distributed in Australia, by MRT Performance

Increase Power and torque

Did you know that your car is detuned!
Unlock the hidden potential of factory ECU's

Learn more Power & Torque

Improve reliability, economy

100% money back satisfaction
Guarantee National Warranty

National Dealer Network

Worlds Number 1 here in Aus

Mitsubishi (UK with the FQ models)
Cosworth (USA and UK)
Subaru (UK with the Prodrive models)
Learn more Tuning Software

Ecutek Subaru, Mitsubishi and Mazda Tuning Software

ECU Software

Subaru K-Line 99 Tuning Suite

The ProECU Subaru K-Line 99 suite allows reprogramming of the standard factory engine management unit for the classic shape Impreza, known as the Turbo 2000 (UK), GT (Europe) and WRX/STI (Japan). The Legacy Twin Turbo and Forester Turbo are also supported for all regions.

35 ECU versions are currently supported from all regions.

Subaru K-Line 99 Tuneable Parameters

Subaru K-Line 99 allows you to alter parameters in the ECU, such as:

  • Fuelling and Fuel Compensation.
  • Ignition Timing and Ignition Compensation.
  • Boost Pressure.
  • Boost Limit.
  • Turbo Dynamics.
  • Boost Pressure Based Speed Limiting.
  • Maximum Speed Limit Removal.
  • Minimum and Maximum Wastegate Duty Cycle.
  • Rev Limit.
  • Air Flow Sensor Scaling.
  • And many more....



Subaru K-Line 99 Supported Vehicles

Subaru K-Line 99 currently supports over 30 different ECU versions.

  • Impreza Turbo - Right Hand Drive
  • Impreza GT - Left Hand Drive.
  • Impreza WRX v5 & v6.
  • Impreza STI v5 & v6 & P1.
  • Impreza WRX & STI Types R and RA also supported.
  • Forester Turbo S & STI.

The list of supported ECU for Flash99 is shown below. This list is constantly being updated:

  • UK Impreza WRX - ae800
  • UK Impreza WRX - ae801
  • UK Impreza WRX - ae802
  • European Impreza WRX - ae780
  • European Impreza WRX - ae781
  • European Impreza WRX - ae782
  • European Prodrive P1 - ag340
  • Japanese Impreza STI5/6 - af040
  • Japanese Impreza STI5/6 - af041
  • Japanese Impreza WRX Type 5/6 RA - ae480
  • Japanese Impreza WRX Type 5/6 RA - ae481
  • Japanese Impreza WRX - ae490
  • Japanese Impreza WRX - ae491
  • Forrester Turbo - af040
  • Forrester Turbo - af041
  • Forrester Turbo - ag050
  • Forrester Turbo - ag060
  • Forrester Turbo - ae901
  • Forrester Turbo STI - ag380
  • Forrester Turbo - af260
  • Forrester Turbo - af261
  • Legacy Twin Turbo - ad981
  • Legacy Twin Turbo - ad981
  • Legacy Twin Turbo - ad983
  • Legacy Twin Turbo - ad984
  • Legacy Twin Turbo - ad985
  • Legacy Twin Turbo - ag292
  • Legacy Twin Turbo - ag302
  • Legacy Twin Turbo - af181
  • Legacy Twin Turbo - af330
  • Legacy Twin Turbo - ad971

Tuning Examples

Below is a dyno plot from a UK 2002 WRX with standard induction, turbo and intercooler. The exhaust has been improved and the ECU remapped to provide 60 BHP more power at high revs, as well as very useful mid-range torque gains.

Remapped UK WRX with Full Sports Catalyst Exhaust System & EcuTek ECU


Remapped UK WRX with Exhaust Backbox (muffler) and EcuTek ECU

Graphical Map Views

All 2d and 3d maps may be viewed graphically for fast interpretation of map shape. This also allows errors to be quickly spotted. The example below shows a fuel map that is being viewed graphically, to show the spectrum of air/fuel ratios used by this ECU.


Subaru K-Line 99 Tuning Suite fuel map

Live Map Access

Whilst testing the car, either on the road or dyno, access to fuelling, ignition and boost maps may be viewed in real time to show which parts of the map are being accessed by the ECU. ProECU Tools will also colour the zones of the fuelling or ignition maps based on the knock correction and lambda values retrieved from the car under test. This provides a new level of diagnostic ability, and allows the tuner to quickly see which areas of the map require attention.

Subaru K-Line 99 ignition map

Subaru K-Line 99 map

Mitsubishi CAN Colt

Mitsubishi CAN Colt

Mitsubishi CAN Colt supports the 2005 onward Euro Mitsubishi Colt CZT and Ralliart vehicles including the SMART ForFour Brabus vehicle. This tuning suite is for versions of these vehicles that use an air flow meter.

7 ECU versions are currently supported from all regions, except Japan.

Features

Mitsubishi CAN Colt allows you to alter parameters in the ECU, such as:

  • Fuel Tables
  • Ignition Timing Tables
  • Desired Boost Pressure & Wastegate Solenoid Control Maps
  • Boost Limit
  • Turbo Dynamics Control
  • Rev Limit
  • Idle Speed Control
  • Fuel Injector Scaling
  • Fuel Injector Battery Voltage Compensation
  • Trustful CEL Enable & Disable

Mitsubishi CAN Colt


Supported Vehicles

ProECU Mitsubishi CAN Colt currently supports over 5 different ECU versions.

2005 onward European Mitusbishi CAN Colt and SMART ForFour Brabus Vehicles:

  • EU Mitsubishi COLT CZT 2004
  • EU Mitsubishi COLT CZT 2005
  • EU Mitsubishi COLT CZC Cabriolet 2005
  • EU Mitsubishi COLT Ralliart 2009
  • EU Mitsubishi COLT Ralliart 2012
  • Smart Forfour Brabus

Tuning Results

Power Graphs

Power curve shown before and after tuning using our example ROM file:


Please note that the standard figures are 9.3 HP above the standard manufacturer figures as a Janspeed exhaust, which gives roughly 10 HP, was fitted to the car when the dyno runs were made.

Torque and boost curve shown before and after tuning using our example ROM file:

 


Live Data

When connected to a car, ProECU can offer real time data and map tracing.

The following data is available from the 'Live Data' tab of the ROM file being accessed. This data is accessed directly from the ECU in real time.

  • RPM: Engine speed. (Revolutions Per Minute)
  • Injector Duty Cycle: Percentage of time that the injector is open vs. closed (the time available changes as Engine speed increases (becomes less).
  • Fuel Trim Short Term & Long Term: This is the percentage of fuel trim that the ECU adds or subtracts to obtain stoichiometric AFR. This is useful to determine when the ECU is running in open/closed loop mode
  • Ignition Timing: This displays the actual ignition timing that the ECU is currently using
  • Knock Retard: Knock retard is the amount of Ignition timing removed by the ECU because of knock
  • Air Flow: Shows the reading from the Mass Airflow sensor
  • External Lambda/AFR Input Channel: This will only be displayed if an External Sensor has been configured in ProECU.
  • Engine Load (Custom RaceROM parameter)

The below screenshots shows some example data for the approximately 47 live data parameters:


It is possible to log the data shown during Map Access mode for analysis in ProECU.
It is then possible to customise the way the logged data are displayed using the Time Graphs, Data Table, Custom 2D Graphing, and Custom 3D Graphing tabs in the Log Viewer, as shown below:

 

 

Mitsubishi CAN Diesel

Mitsubishi CAN Diesel

Mitsubishi CAN Diesel product supports the Mitsubishi Pajero, Triton, L200 and Shogun vehicles that use the Common Rail Diesel engines.
165 ECU versions are currently supported from all regions.


Mitsubishi CAN Diesel Features

Mitsubishi CAN Diesel allows you to alter parameters in the ECU, such as:

  • Fuel Pressure Tables
  • Ignition Quantity Tables
  • Desired Torque Tables
  • Injector Opening Time
  • Desired Boost Pressure
  • Maximum Torque Tables
  • Boost Limit Control
  • And many more...
With access to these maps, you have:
  • Full access to all the Engine ECU Torque Control calibration tables.
  • The ability to adjust and re-calibrate target values like Target Boost Pressure, Target Fuel Rail Pressure or Target Airflow.
  • The ability to adjust and re-calibrate Limiters like Boost Limit, Fuel Pressure Limit or Injection Quantity Limit.
  • The ability to adjust and re-calibrate the compensation tables such as Air Temp, Coolant Temp and Atmospheric Pressure.

Mitsubishi CAN Diesel

Supported Vehicles

ProECU Mitsubishi CAN Diesel currently supports over 90 different ECU versions.

Mitsubishi Common Rail Diesel Vehicles:
  • Mitsubishi 2.5 2WD 116PS Thai
  • Mitsubishi 2.5 2WD Euro 3
  • Mitsubishi 2.5 2WD 136PS EU
  • Mitsubishi 2.5 4WD 136PS EU
  • Mitsubishi 2.5 4WD 140PS Thai
  • Mitsubishi 2.5 4WD EU
  • Mitsubishi 2.5 4WD Euro 3
  • Mitsubishi 3.2 4WD 136PS AU
  • Mitsubishi 3.2 4WD 165PS Brazil
  • Mitsubishi 3.2 4WD 165PS EU
  • Mitsubishi 3.2 4WD 165PS Thai
  • Mitsubishi 3.2 4WD 200PS EU
  • Mitsubishi 3.2 Shogun EU
  • Mitsubishi 3.2 Shogun EU - DPF

Live Data

When connected to a car, ProECU can offer real time data and map tracing.

The following data is available from the 'Live Data' tab of the ROM file being accessed. This data is accessed directly from the ECU in real time.

  • RPM: Engine speed. (Revolutions Per Minute)
  • Fuel Pressure
  • EGR Duty
  • DPF Regeneration
  • Equivalence Ratio – Lambda

The below screenshots shows some example data for 24 out of approximately 110 live data parameters:

Mitsubishi CAN Diesel
It is possible to log the data shown during Map Access mode for analysis in ProECU. It is then possible to customise the way the logged data are displayed using the Time Graphs, Data Table, Custom 2D Graphing, and Custom 3D Graphing tabs in the Log Viewer.

Mitsubishi EVO X

Mitsubishi EVO X supports the legendary Mitsubishi EVO X and Lancer Ralliart vehicles.

96 ECU versions are currently supported from all regions.

FlashCAN Mitsubishi EVO X Features

Mitsubishi EVO X allows you to alter parameters in the ECU, such as:

  • Fuel Tables
  • Ignition Timing Tables
  • Desired Boost Pressure & Wastegate Solenoid Control Maps
  • Boost Limit
  • Turbo Dynamics Control
  • Rev Limit
  • Speed Limit
  • Idle Speed Control
  • Fuel Injector Scaling
  • Fuel Injector Battery Voltage Compensation
  • Intercooler Spray Control (not available on all models)

Mitsubishi EVO X

RaceROM EVO X

RaceROM supports all models of the Mitsubishi EVO X.

RaceROM EVO X supports the following feature enhancements:

DTC Enable & Disable

Diagnostic trouble codes can now be enabled and disabled in the ECU, allowing you to tune further without the ECU going into special conditions.

Custom Live Data Support

Mitsubishi EVO X RaceROM enables FlashCAN EVO to measure and log extra diagnostic parameters not accessable as standard, such as:

  • Engine Load
  • Charge Air Temperature
  • Boost

 

Supported Vehicles

ProECU Mitsubishi EVO X currently supports over 70 different ECU versions.

Mitsubishi EVO X and Lancer Ralliart Vehicles:

  • AUS Mitsubishi EVO EVO 10 SST 2011
  • AUS Mitsubishi EVO Lancer Ralliart SST 2011
  • EU Mitsubishi EVO 10 5 Speed 2008
  • EU Mitsubishi EVO 10 5 Speed 2011
  • EU Mitsubishi EVO 10 SST 2008
  • EU Mitsubishi EVO Lancer Ralliart 2009
  • JDM Mitsubishi EVO 10 5 Speed 2008
  • JDM Mitsubishi EVO 10 5 Speed GSR 2009
  • JDM Mitsubishi EVO 10 5 Speed GST 2009
  • JDM Mitsubishi EVO 10 5 Speed GST 2010
  • JDM Mitsubishi EVO 10 5 Speed RS 2008
  • JDM Mitsubishi EVO 10 5 Speed RS 2009
  • JDM Mitsubishi EVO 10 5 Speed RS 2010
  • JDM Mitsubishi EVO 10 SST 2008
  • JDM Mitsubishi EVO 10 SST 2009
  • JDM Mitsubishi EVO 10 SST 2010
  • JDM Galant Fortis 2009
  • SA Mitsubishi EVO 10 SST 2010
  • UK Mitsubishi EVO 10 5 Speed 2008
  • UK Mitsubishi EVO 10 SST 2008
  • US Mitsubishi EVO 10 5 Speed 2008
  • US Mitsubishi EVO 10 5 Speed GSR 2010
  • US Mitsubishi EVO 10 5 Speed GSR 2011
  • US Mitsubishi EVO 10 SST 2008
  • US Mitsubishi EVO 10 SST 2009
  • US Mitsubishi EVO Lancer Ralliart 2009

Live Data

When connected to a car, ProECU Mitsubishi EVO X can offer real time data and map tracing.

The below example data for 27 out of approximately 70 live data parameters is available from the "Live Data" tab of the ROM file being accessed. This data is accessed directly from the ECU in real time.

  • RPM: Engine speed. (Revolutions Per Minute)
  • Injector Duty Cycle: Percentage of time that the injector is open vs. closed (the time available changes as Engine speed increases (becomes less).
  • Fuel Trim Short Term & Long Term: This is the percentage of fuel trim that the ECU adds or subtracts to obtain stoichiometric AFR. This is useful to determine when the ECU is running in open/closed loop mode
  • Ignition Timing: This displays the actual ignition timing that the ECU is currently using
  • Knock Retard: Knock retard is the amount of Ignition timing removed by the ECU because of knock
  • Air Flow: Shows the reading from the Mass Airflow sensor
  • External Lambda/AFR Input Channel: This will only be displayed if an External Sensor has been configured in DeltaDash.
  • Custom RaceROM parameters such as:-
    • Engine Load
    • Charge Air Temperature
    • Boost

 

It is possible to log the data shown during Map Access mode for analysis in DeltaDash or ProECU.
It is then possible to customise the way the logged data are displayed using the Time Graphs, Data Table, Custom 2D Graphing, and Custom 3D Graphing tabs in the Log Viewer, as shown below:


Mitsubishi EVO X

Mitsubishi EVO X

Live Map Access

The example below shows how the Live Coloured Map Tracing feature shows the Knock correction on the Ignition Map.
It is possible to get more detailed information by holding the mouse over a specific value.

Mitsubishi EVO X

Mitsubishi K-Line

Mitsubishi K-Line

Mitsubishi K-Line supports the legendary Mitsubishi EVO 5-9 range of vehicles.

89 ECU versions are currently supported from all regions.

Mitsubishi K-Line Features

Mitsubishi K-Line allows you to alter parameters in the ECU, such as:

  • Fuel Tables
  • Ignition Timing Tables
  • Desired Boost Pressure & Wastegate Solenoid Control Maps
  • Boost Limit
  • Turbo Dynamics Control
  • Rev Limit
  • Speed Limit
  • Fuel Injector Scaling
  • Fuel Injector Battery Voltage Compensation
  • Intercooler Spray Control
  • And many more...

Mitsubishi K-Line

Supported Vehicles

Mitsubishi K-Line currently supports over 85 different ECU versions.

EcuTek Mitsubishi K-Line - Mitsubishi EVO 5/6/7/8/9 Vehicles:

  • Mitsubishi EVO 5 GSR
  • Mitsubishi EVO 5 RS
  • Mitsubishi EVO 6 GSR
  • Mitsubishi EVO 6 Ralliart
  • Mitsubishi EVO 6 RS
  • Mitsubishi EVO 6 RS2
  • Mitsubishi EVO 6 Tommi Makinen
  • Mitsubishi EVO 7
  • Mitsubishi EVO 7 GSR
  • Mitsubishi EVO 7 Ralliart
  • Mitsubishi EVO 7 RS
  • Mitsubishi EVO 7 RS2
  • Mitsubishi EVO 8 European
  • Mitsubishi EVO 8 GSR
  • Mitsubishi EVO 8 MR
  • Mitsubishi EVO 8 MR Ralliart
  • Mitsubishi EVO 8 Ralliart
  • Mitsubishi EVO 8 USA 03/04/05 Model Year
  • Mitsubishi EVO 9 GSR
  • Mitsubishi EVO 9 GST/RS/GT Ralliart
  • Mitsubishi EVO 9 GT
  • Mitsubishi EVO 9 RS
  • Mitsubishi EVO 9 USA/AUS/EU 06 Model Year
  • Mitsubishi EVO 9 Wagon

Performance Books